PT. Seven Era Jaya
PT. SEVEN ERA JAYA sebagai Agen Seven Aluminium Composite Panel Sukabumi, Cianjur, Karawang Cikarang melayani pengiriman keluar Kota dari gudang Tangerang untuk rute-rute jauh dengan pengiriman tidak terbatas jumlah minimum apalagi jumlah maximumnya tidak kami batasi, selagi pembelian dari kami dengan harga promo, yang menjadi beban variabel adalah ongkos kirim material ke masing-masing kota akan ditentukan oleh Jarak pengiriman, Semakin besar volume pemesanan, maka akan semakin ringan biaya pengiriman yang akan kami kenakan charge.
Agen Seven Aluminium Composite Panel Sukabumi, Cianjur, Karawang Cikarang
Kami sudah melakukan sejumlah pengiriman Seven aluminium Composite Panel ke kota Sukabumi, Cianjur, Karawang, dan Cikarang dengan menggunakan mobil pickup untuk Seven aluminium composite panel dengan panjang standard 2440mm, dan kami menggunakan truck long chasis untuk pengiriman seven aluminium composite panel ukuran panjang 4880mm dari gudang Tangerang ke semua tujuan di Indonesia.
Spesifikasi Seven Aluminium Composite Panel
PT. SEVEN ERA JAYA sebagai agen distributor penjualan Seven aluminium composite panel merasa bertanggung jawab dalam memberikan secara detail spesifikasi material yang dijual ke customer sebelum melakukan pemilihan warna, adapun Spesifikasi Seven Aluminium untuk Exterior adalah sebagai berikut :
| PT. SEVEN ERA JAYA | ||||||
| SEVEN ALUMINIUM COMPOSITE PANEL SPESIFICATION | ||||||
| TEST REPORT OF EXTERIOR | ||||||
| NO | TEST ITEM | Standard Index | Test Value | Single Item | ||
| High Class | Qualified Class | Determination | ||||
| 1 | APPEARANCE QUALITY | Vestige | Indistinct | Indistinct | Indistinct | High-Class |
| Coating Omit | Not Allowed | Not Allowed | No | High-Class | ||
| Ripples | Not Allowed | Indistinct | No | High-Class | ||
| Rubbless (<10mm) | Not Allowed | <1/M2 | No | High-Class | ||
| Flaw (<3mm) | <3/M2 | <10/M2 | No | High-Class | ||
| Abration | Not Allowed | Total Length <100/M2 | No | High-Class | ||
| Scratch | Not Allowed | Total Area <300/M2 | No | High-Class | ||
| Total number of abrasion and scratch | Not Allowed | <4 | 0 | High-Class | ||
| Aberration | Indistinct | Indistinct | Indistinct | High-Class | ||
| 2 | Dimension Deviation | Length | +3mm | mm – ‘+1.3mm | Passed | |
| Width | +2mm | mm – ‘+1.1mm | Passed | |||
| Thickness | +0.2mm | +0.04mm- + 0.20mm | Passed | |||
| Squarences | <5mm | 1.2mm | Passed | |||
| Edge Unstraightness | <1mm/m | 0.15mm/m | Passed | |||
| Warpage | <5mm/m | 1.3mm/m | Passed | |||
| 3 | Coating Thickness | Min >25µ M | 27µ M average 28µ M | Passed | ||
| 4 | Gloss Tolerance | <10(gloss>70)<5(gloss<70) | 1.8 (gloss=42.2) | Passed | ||
| 5 | Pencil Hardness | >HB | 3H | Passed | ||
| 6 | Coating Flexibility | <2T | 0T | Passed | ||
| 7 | Coating Adhesive | Not lower than class 1 | Class 0 | Passed | ||
| 8 | Impact Resistance | 50Kg. CM no depainting, no crack | 50Kg. CM no depainting, no crack | Passed | ||
| 9 | Grinding Resistance | >5L / µ M | 12.9L/µ M | Passed | ||
| 10 | Boiling Water Resistance | No Change | No Change | Passed | ||
| 11 | Pullute Resistance | >15 % | 2.50% | Passed | ||
| 12 | Acid Resistance | No Change | No Change | Passed | ||
| 13 | Alkaline Resistance | No Change | No Change | Passed | ||
| 14 | Oil Resistance | No Change | No Change | Passed | ||
| 15 | Solvent Resistance | No Change | No Change | Passed | ||
| 16 | Scrub Resistance | No Change when >1000 times | No Change when 1000 times | Passed | ||
| 17 | Face Density | Specifide Value + 0.5Kg/M2 | 5.59Kg/M2 | Passed | ||
| 18 | Bending Strength | >100 MPa | 124.5 Mpa | Passed | ||
| 19 | Bending Elastic Modulus | >2.0×104 Mpa | 3.20 X104 Mpa | Passed | ||
| 20 | Penetration Resistance | >9.0 KN | 9.8 KN | Passed | ||
| 21 | Shearing Strength | >28.0 MPA | 29.8 KN | Passed | ||
| 22 | 180 o Peel Strength | >7.0N/mm | 13.7 N/ mm | Passed | ||
| 23 | Temperature Cycle Resistance | No Change | No Change | Passed | ||
| 24 | Thermal Expansion Coeficient | <4.00 X 10-5oC -1 | 7.9 X 10-6oC -1 | Passed | ||
| 25 | Heat Distortion Temperature | >105 oC | 105 oC | Passed | ||
| 26 | Resistance Salt Spray | < Grade 2 | 1 Grade | Passed | ||
| 27 | Articificial Wethering | Colour Differences | <3.0 | 1.05 | Passed | |
| Degredation of Gloss | < Grade 2 | 1 Grade | Passed | |||
| Others | 0 Grade | 0 Grade | Passed | |||
Dari detail spesifiaksi Seven aluminium composite panel untuk exterior diatas yang ditampilkan oleh PT. SEVEN ERA JAYA dapat dilihat bahwa klasifikasi nya adalah HIGH CLASS material berstandard International.
Agen Seven Aluminium Composite Panel Sukabumi, Cianjur, Karawang Cikarang
Berikut dokumentasi Pelayanan kami dalam memenuhi kebutuhan penjualan dan pemasangan Seven aluminium composite panel untuk tujuan kota Sukabumi, Cianjur, Karawang, dan Cikarang dengan tambahan ongkos kirim dari gudang Tangerang,
Harga Agen SEVEN dan Jasa Pasang Aluminium Composite Panel
Harga Agen SEVEN dan Jasa Pasang Aluminium Composite Panel
Agen Seven Aluminium Composite Panel Sukabumi, Cianjur, Karawang Cikarang
Agen Seven Aluminium Composite Panel Sukabumi, Cianjur, Karawang Cikarang
Agen Seven Aluminium Composite Panel Sukabumi, Cianjur, Karawang Cikarang
Agen Seven Aluminium Composite Panel Sukabumi, Cianjur, Karawang Cikarang
Harga Agen SEVEN dan Jasa Pasang Aluminium Composite Panel
